Search Products

Stay Connected: For our updated shopping experience visit B2B Tech Supply
The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Browse by Category

For our updated shopping experience visit B2B Tech Supply

Search SH-24HW on B2B Tech Supply


Buy SH-24HW on B2B Tech Supply

SH-24HW Potter High Output Strobe and Horn White

SH-24HW Potter High Output Strobe and Horn White
SKU: SH-24HW

The SH-24H Select-A-Strobe/Horn™ Series provides a wide range of candela light output options in a single device. The candela settings include a 24 volt DC operation for the 95, 110, 135, 150, 177 or 185 setting. The candela setting is displayed through the front window and is selectable using a drum wheel.

The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, Electro- Mechanical, Broadband and Chime.

The voltage input can be either regulated DC or full wave rectified (FWR) 24 volt operation with an operating range from 16 to 33 VDC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module.

The SH-24H utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4” square electrical boxes. The back plate allows the installer to mount the plate and connect the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look.

Price: $38.00
This item is discontinued. Contact us for alternative options.
Product Details
  • UL and cUL listed
  • 24 VDC with 95, 110, 135, 150, 177 or 185 cd settings
  • 6 distinct candela settings
  • Candela selection view window
  • 33 sound output settings
  • Horn or chime sound output
  • Pre-wire back plate
  • Universal back plate mounting (single gang, double gang, octagon, or 4” square)
  • Single screw mounting
  • Wall mount
  • Indoor only
  • Low current draw

SH-24HW Cutsheet

Product Reviews
Rate this product: