| Model | IGP1030 |
| ..[Camera] |
Signal System | Progressive image processing |
Scaning System | 4:3 Progressive |
Image Sensor | 1/2 inch Progerssive CMOS Sensor |
Sync. System | Internal |
Effective Pixels Number | 1280(H) x 960(V) 1.3 Mega |
Horizontal Resolution | 800 TV Lines |
Video Output Level | Select NTSC/PAL 1.0Vp-p (BNC 75Ω, composite)
* VGA/QVGA Mode Only |
Lens Mount
| CS Mount, DC Iris |
Min. Illumination
| 1 Lux(DSS On) |
Digital Pan/Tilt
| Image Cropping Function |
Back Light Compensation | On/Off |
Flickerless | On/Off |
White Balance | Auto/Manual |
Exposure | Auto/Manual |
Function | B/W |
Elec. Shutter Speed | NTSC : 1/6 ~ 1/600 (13 Step)
PAL : 1/6 ~ 1/500 (13 Step) |
| ..[System] |
Main Processor | 32bit Embedded CPU with Linux |
System Memory
| NAND Flash Memory : 64MByte, 128MB DDR Memory
SD Card : Support for Max 4GByte Size |
| ..[Video / Audio] |
Compression
| SXGA / XGA : MJPEG
VGA : MJPEG / MPEG4 / H.264 |
Frame Rate
| SXGA, XGA : MJPEG (Max. 24fps)
VGA : MJPEG / MPEG4 / H.264 (24fps) |
Resolution
| SXGA (1280 x 960), XGA (1024 x 768)
VGA (640 x 480), QVGA (320 x 240) |
Video Streaming | SXGA / XGA : MJPEG Single mode
VGA : Dual Capable |
Constant and variable bit rate in MPEG4 (128kbps ~ 3M bps)
Controllable frame rate and bandwidth |
Image Setting | Compression level setting
Configurable Brightness, Sharpness, White Balance |
Audio | Two-way (full duplex / ADPCM G.726) |
| ..[Network] |
Protocol
| IPv4, HTTP, TCP, RTSP, RTP, RTCP, UDP, SMTP, FTP, ICMP, DHCP, UPnP, Bonjour, ARP, DNS, DynDNS |
Supported DDNS
| 1.CNB DDNS 2.DynDNS.org 3.Reference code with SDK |
Video Access from Web browser
| Camera live viewer for up to 10 clients |
Suppot PoE | Standard IEEE 802.3af supported |
| ..[Security] |
Access Level Setup
| Multiple user access levels with password protection |
Network Security
| IP Filtering |
| ..[Alarm and Event Managerment] |
Image Detection
| Motion detection (Select 3 Regions - each area) |
Sensor Detection
| Sensor In, Scheduling, Alarm out |
After Event Process
| JPEG Image upload over FTP server / SMTP (E-mail server) |
Local Storage
| JPEG Image write to Internal & SD card memory
- Internal memory : Max 32MByte
- SD memory : Support size Max 4GByte |
Pre/Post Alarm
| Detail time-set : Max Pre alarm 5 sec / Post alarm 8 sec
Local storage (Internal memory or SD card memory : JPEG image) |
| ..[Applications] |
Browser
| Internet Explorer 6.0 or higher |
Monitoring Application
| Web Viewer (Window Web Browser Base)
Live view for up to 10 user clients
Video Snapshot & recording to file (JPEG file)
XNVR Viewer and Utility (IP-Installer, etc) |
System Control
| CNB Camera Management tool on CD and web-based configuration |
| ..[Maintenance] |
System Upgrade
| Firmware upgrade over HTTP |
PTZ control (RS-485)
| PTZ Protocol Service (User define update) |
| ..[Mechanical] |
Operating Temperature
| 0℃ ~ 40℃ |
Power
| DC 12V Max. 5 W |
