Search Products

Stay Connected: For our updated shopping experience visit B2B Tech Supply
The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Browse by Category

For our updated shopping experience visit B2B Tech Supply

3992500 Potter UDACT-9100 Digital Alarm Communicator Transmitter/Dialer Module

3992500 Potter UDACT-9100 Digital Alarm Communicator Transmitter/Dialer Module
3992500 Potter UDACT-9100 Digital Alarm Communicator Transmitter/Dialer Module
SKU: 3992500
  • Model Number: UDACT-9100
  • Item Number: 3992500
  • Communicates with PFC-5000 or PFC-9000 Series fire alarm control panels via an RS-485 data link
  • Programmed to use the Ademco Contact ID and SIA-DCS reporting protocols
  • Can be configured for DACT or UDACT mode of operation
  • DACT mode transmits a common Alarm, Supervisory, Waterflow and Trouble information
  • UDACT mode transmits point-specifi c Alarm, Supervisory, Waterflow, and Trouble information
  • UDACT-9100 has the ability of disconnecting the incoming and outgoing calls and capturing the line for transmission to the Digital Alarm Communicator Receiver (DACR)
  • Onsite or remote programming
Model: UDACT-9100
Price: $237.00
Product Details
  • Onsite configurable with the on-board keypad and the CFG-LCD Configuration Tool or using the UIMA Programming Tool and a computer with an available serial or USB port
  • Remotely configurable via a Personal Computer with a modem (Confi guration is passcode protected)
  • Provides telephone line monitoring and reports status via LED indication on-board
  • Provides event logs of 500 entries each to save events from local dialer or remote fire alarm panel
  • Logs can be reviewed locally with the CFG-LCD Configuration Tool or remotely via modem
  • Continuously supervises the status of each of two connected telephone lines at approximately one minute intervals
  • Mounts in a dedicated location in the PFC-5000 or PFC-9000 Series main chassis

The UDACT-9100 Digital Alarm Communicator Transmitter/Dialer Module allows PFC-5000 or PFC-9000 Series Fire Alarm Control Panels to transmit Alarm, Supervisory and Trouble information on two telephone lines to a monitoring facility.


The UDACT-9100 is powered by the host fire alarm control panel and communicates with the fire alarm control panel via an RS-485 data link. The Digital Communicator can be programmed for dual line operation and uses the Security Industry Association (SIA) and Ademco Contact ID reporting protocols.


3992500 Datasheet

Product Reviews
Rate this product: